Sale!

Battery Segway i2 and x2 – NEW, USED, REPAIR by CELL EXCHANGE

NEW – For new battery with increased range please click here“new battery for SEGWAY PT”

OPTION A: USED 70
– good used battery with at least 70-79% capacity incl. Test protocol

OPTION B: USED 80
– good used battery with at least 80-89% capacity incl. Test protocol

OPTION C: USED 90
– good used battery with at least 90-100% capacity included. Test protocol

OPTION D: NEW REFURBISHED BATTERY
– NEW CELLS – REPAIR or complete CELL REPLACEMENT – for this we use 100% intrinsically safe, high-quality LiFePo4 cells (HIGH CAP CAPACITY 7.2Ah -> min. 6.8Ah = min. 130% usable power) including Test protocol

In most cases, we also have already assembled batteries in stock so that we can ship them immediately!

 

 

 

Further information on the SEGWAY PT battery:

The original Segway PT Li-Ion battery (battery) Saphion Technology 73.6 VDC 5.6 Ah

Suitable for all Segway i2 and x2 models, whether Segway Gen2 and SE series.

A Segway PT always requires 2 batteries to drive. You should also ensure that the batteries installed on the Segway PT have a similar power density. The weaker of the two batteries limits the range. This means that a powerful new battery cannot perform to its full potential when combined with a low-power battery on a Segway PT. We therefore always recommend replacing both batteries on the Segway PT or carrying out a battery diagnosis to determine the performance of the second battery. Even older batteries can still achieve excellent values with appropriate care.

But it doesn’t always have to be a new battery. If you have a faulty battery, CROSSTOURS AT can often save the faulty battery at low cost with a so-called battery resuscitation or battery repair.

Tips for caring for your Segway PT battery:

  • Charge the new battery for 12 hours before the first ride.
  • Always store dry!
  • Always store Batteries or Segway PT with installed Battery at temperatures above 12 degrees Celsius, at best 15 degrees Celsius!
  • Have the batteries calibrated once a year as part of the service
  • Always leave the Segway PT with the battery installed connected to the power source. The internal charger (UIC) takes over the optimal battery charging (trickle charge) for them.

Winter use is no problem. However, make sure that you start the Segway PT at a temperature above 10 degrees and leave the Segway PT on as long as you are traveling in cooler temperatures. This means that the temperature of the Segway PT can be kept up by the waste heat produced by the battery during use. After use (also during transportation in the car or during a stopover), always store in a dry place above 10 degrees. Then your Segway PT will also survive rides below 0 degrees.

Range:

The Segway PT batteries are very robust and have a high power density. However, it is also important for rechargeable batteries that the power is provided permanently and even after many charges. You can travel up to 40 km on one charge, which only requires approx. 1 kWh, so the electricity costs for 100 km are less than €1, even with the most expensive electricity tariff.

The range is negatively influenced by:

  • Low outside temperatures cause the battery to “fall asleep
  • increased friction of the tires due to low tire pressure
  • high weight of the driver
  • uneconomical driving i.e. always at the limit or unnecessary acceleration or braking
  • steep inclines (climbing)

Safety:

  • Protect batteries and their connectors from moisture
  • Only charge batteries at adequately fused sockets and with charging cables designed for this purpose.
  • Only high-quality cells are used for Segway PT batteries
  • The batteries are manufactured to a high standard and are built in such a way that there are virtually no short circuits and therefore no fires.

Technical data:

  • 92 LiFePo4 Li-Ion cells
  • Charging time: 8h
  • Operating temperatures: -10° to 50°C
  • Charging temperature 10° to 30°C
  • Capacity (Ah) and voltage :5.6 Ah, 73.6 V
  • Dimensions: 35.7 cm × 19 cm × 8.2 cm
  • Performance promise of the manufacturer: approx. 1000 charging cycles
  • Warranties: 1 year warranty, for cell replacement only on the cells themselves and 6 months for used batteries
  • Weight: piece 5.2 kg

Optionally we offer:

Akku Leistungstest 97
Regelmäßige Akkupflege erhöht die Lebensdauer
Segway Akku Reparatur Neu Gebraucht Test Reanimieren Reanimation Crosstours Linz
Akku-Reparatur, Zellentausch & gepflegte gebrauchte Akkus aus dem Tourenbetrieb

Battery Segway i2 and x2 – NEW, USED, CELL REPLACEMENT, REPLACEMENT

500,00 € – 1.099,00 €

incl. VAT zzgl. Versandkosten

Segway battery for Segway i2 and x2 Gen2, and SE

6 months WARRANTY on used batteries

12 months WARRANTY on recelled batteries

Look for something else? Perhaps we can help you! Contact us

Description

Battery Segway i2 and x2 – NEW, USED, REPAIR by CELL EXCHANGE

NEW – For new battery with increased range please click here“new battery for SEGWAY PT”

OPTION A: USED 70
– good used battery with at least 70-79% capacity incl. Test protocol

OPTION B: USED 80
– good used battery with at least 80-89% capacity incl. Test protocol

OPTION C: USED 90
– good used battery with at least 90-100% capacity included. Test protocol

OPTION D: NEW REFURBISHED BATTERY
– NEW CELLS – REPAIR or complete CELL REPLACEMENT – for this we use 100% intrinsically safe, high-quality LiFePo4 cells (HIGH CAP CAPACITY 7.2Ah -> min. 6.8Ah = min. 130% usable power) including Test protocol

In most cases, we also have already assembled batteries in stock so that we can ship them immediately!

 

 

 

Further information on the SEGWAY PT battery:

The original Segway PT Li-Ion battery (battery) Saphion Technology 73.6 VDC 5.6 Ah

Suitable for all Segway i2 and x2 models, whether Segway Gen2 and SE series.

A Segway PT always requires 2 batteries to drive. You should also ensure that the batteries installed on the Segway PT have a similar power density. The weaker of the two batteries limits the range. This means that a powerful new battery cannot perform to its full potential when combined with a low-power battery on a Segway PT. We therefore always recommend replacing both batteries on the Segway PT or carrying out a battery diagnosis to determine the performance of the second battery. Even older batteries can still achieve excellent values with appropriate care.

But it doesn’t always have to be a new battery. If you have a faulty battery, CROSSTOURS AT can often save the faulty battery at low cost with a so-called battery resuscitation or battery repair.

Tips for caring for your Segway PT battery:

  • Charge the new battery for 12 hours before the first ride.
  • Always store dry!
  • Always store Batteries or Segway PT with installed Battery at temperatures above 12 degrees Celsius, at best 15 degrees Celsius!
  • Have the batteries calibrated once a year as part of the service
  • Always leave the Segway PT with the battery installed connected to the power source. The internal charger (UIC) takes over the optimal battery charging (trickle charge) for them.

Winter use is no problem. However, make sure that you start the Segway PT at a temperature above 10 degrees and leave the Segway PT on as long as you are traveling in cooler temperatures. This means that the temperature of the Segway PT can be kept up by the waste heat produced by the battery during use. After use (also during transportation in the car or during a stopover), always store in a dry place above 10 degrees. Then your Segway PT will also survive rides below 0 degrees.

Range:

The Segway PT batteries are very robust and have a high power density. However, it is also important for rechargeable batteries that the power is provided permanently and even after many charges. You can travel up to 40 km on one charge, which only requires approx. 1 kWh, so the electricity costs for 100 km are less than €1, even with the most expensive electricity tariff.

The range is negatively influenced by:

  • Low outside temperatures cause the battery to “fall asleep
  • increased friction of the tires due to low tire pressure
  • high weight of the driver
  • uneconomical driving i.e. always at the limit or unnecessary acceleration or braking
  • steep inclines (climbing)

Safety:

  • Protect batteries and their connectors from moisture
  • Only charge batteries at adequately fused sockets and with charging cables designed for this purpose.
  • Only high-quality cells are used for Segway PT batteries
  • The batteries are manufactured to a high standard and are built in such a way that there are virtually no short circuits and therefore no fires.

Technical data:

  • 92 LiFePo4 Li-Ion cells
  • Charging time: 8h
  • Operating temperatures: -10° to 50°C
  • Charging temperature 10° to 30°C
  • Capacity (Ah) and voltage :5.6 Ah, 73.6 V
  • Dimensions: 35.7 cm × 19 cm × 8.2 cm
  • Performance promise of the manufacturer: approx. 1000 charging cycles
  • Warranties: 1 year warranty, for cell replacement only on the cells themselves and 6 months for used batteries
  • Weight: piece 5.2 kg

Optionally we offer:

Akku Leistungstest 97
Regelmäßige Akkupflege erhöht die Lebensdauer
Segway Akku Reparatur Neu Gebraucht Test Reanimieren Reanimation Crosstours Linz
Akku-Reparatur, Zellentausch & gepflegte gebrauchte Akkus aus dem Tourenbetrieb

Additional information

Weight 6 kg
SELECTION

USED 70, USED 80, USED 90, CELL-RENEWED BATTERY (new LiFePo4 cells)

You may also like…

Related products